RODAC RDTREP01 - MULTIPURPOSE BATTERY POWERED FUEL TRANSFER PUMP

TREP01 flow control handle allows transferring of various liquids without spilling and controls the amount of liquid that is dispensed.

SPECIFICATIONS

Power: Two (D) Batteries, Sold Separately

Flow Rate: 2.5 Gallons per Minute

Suction Tube: 15 inch

Discharge Hose: 3.28 ft.

Compatible Liquids: Gasoline, E15, E85 (Remove pump after use, E85 may corrode seals), diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils

FLOW CONTROL NOZZLE

Control the rate of liquid at any moment by squeezing the Nozzle lever

Upper lever position for watering

Lower lever position for refueling

Can be locked for longer watering sessions

CSA CERTIFIED

The TREP01 is officially certified and rigorously tested by the CSA group

This assures that our product's handling of electronics and gasoline are absolutely safe to use according to the high standards of ANSI, UL, CSA and NSF

SUCTION TUBE

Adjustable Length: 15 inch

Fits on 3 Gallon to 6 Gallon gas cans to 5 gallon pails

Suction end Outer Diameter: 1.2 inch

SWIVEL NUT NOZZLE

Nozzle connection can perform a 360 degree rotation to prevent hose from tangling

INCOMPATIBLE

Thinners or solvents, hot water, drinking water, acetone, benzene, creosol, phenol, methyl ethyl, concentrated caustic liquid soda, nitric acid, hydrochloric acid, sulfuric acid, etc.

WHAT'S INCLUDED

Transfer Pump, Nozzle & Manual